Page 1
USER’S MANUAL MANUEL DE L’UTILISATEUR MANUAL DEL USUARIO LTV-32w4 HDC LTV-40w1 HDC Widescreen DVD Combo Combo Lecteur à Écran Géant Combo DVD Pantalla Grande...
Contents Cleaning the LCD TV DVD combo…………………………………….…2 Product Safety Instructions…………………………………………….….3 Antenna Installation Safety………………………………………………..4 Safety Guidelines…………………………………………………………..5 INSTALLATION Package Contents………………………………………………………….6 Front View of the LCD TV DVD combo………………………………….6 Rear View of the LCD TV DVD combo…………………………………..6 Side View of the LCD TV DVD combo…………………………………..7 Input connectors of the LCD TV DVD combo…………………………..8 Remote Control…………………………………………………………...9 Installation…………………………………………………………………11...
LCD TV DVD combo screen or case. Some chemical cleaners have been reported to damage the screen and/or LCD TV DVD combo case. Westinghouse Digital will not be liable for damage resulting from the use of any ammonia or alcohol-based cleaners.
• If the LCD TV DVD combo emits smoke, abnormal noise, or a strange odor, immediately turn it off and contact the Westinghouse Service Center. • WARNING – To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose...
Antenna Installation Safety Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use the LCD TV DVD combo near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the Westinghouse Service Center or an experienced radio/TV technician for assistance. FCC Warning To assure continued FCC compliance, the user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores.
INSTALLATION This User Manual covers models: LTV-32w4HDC and LTV-40w1HDC Package Contents Your product package includes: • Westinghouse LCD TV DVD combo • Remote Control (with batteries) • Power Cord • Quick Connect Guide • User’s Manual • Warranty Card Front View of the LCD TV DVD combo...
Side View of the LCD TV Control keys Control Key 1. Menu 2. Volume + / - 3. Channel + / - 4. Input 5. Power Play/Pause Chapter Forward Chapter Reverse ■ STOP SpineDesign Input connector Turn OSD Menu ON/OFF Increase/Decrease sound volume or adjust a highlighted control while in the OSD Menu Channel up/down when input is TV or highlight a...
Input connector 1. S-Video Input Connect to a legacy video device such as a VCR or video game system. 2. Video Input Connect the Composite Video to a legacy video device such as a VCR or video game system. 3. Video & S-Video Audio Input (Right / Left) Connect an external audio source to this jack (Audio (R/L).
Remote Control 1. POWER : Switch the power On/Off 2. Mute : Turn the Sound On/Off. 3. DVD Eject : Eject the DVD disc. 4. PC : Select VGA source input. 5. DVD : Select DVD source input. 6. TV : Select TV source input to toggle between Standard Definition TV (SDTV) and High Definition TV (HDTV).
Page 11
Remote Control (cont.) 18. Menu : Turn OSD Menu ON/OFF. OSD Menu control. 20. Enter : Execute a command. 21. INFO : Display the source and channel information 22. EPG : Electronic program guide for HDTV 23. DVD (Setup) button: Press when the player is in either play or stop mode to open and close the setup screen (disc must be inserted).
Installation 1. Insert Remote Control Batteries 1) Remove the battery cover. 2) Insert the batteries corresponding to (+) and (−) marks on the battery compartment. 3) Re-attach the battery cover. CAUTION: • Only use AAA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury.
Page 13
Connect one or all of the following into the back of the LCD TV DVD combo. IMPORTANT: Before beginning, make sure all devices are turned off. 2. Connect audio and video cables from a PC VGA CONNECTION: Connect an analog VGA cable from your PC VGA OUT port to the LCD TV DVD combo VGA IN port.
Page 14
4. Connect power cables Connect the power cord to the LCD TV DVD combo then to a properly grounded AC outlet. MPORTANT: The power input voltage is 120VAC, 60 Hz, 3A, Before beginning, make sure all devices are turned off. 5.
Playing a Disc This product is an LCD TV DVD combo with Westinghouse Auto Wake feature. From the power off state, just insert disc, sit back, and enjoy your movie. This section describes the basics on how to play a disc.
Customizing the function You can change the default DVD setting to your preference via remote control keys or control panel on the right side of LCD. To display DVD setting menu, press Setup button on the remote control or select DVD SETTING submenu from main menu.
Function adjustment: All the function can be adjusted either by the remote control or using the control keys on the right side of LCD TV DVD combo. To display the OSD main menu, press the Menu button on the right side of front control keys of the LCD TV DVD combo or the MENU key on the remote control.
AUDIO SETTING: Function Name BASS Bass adjustment TREBLE Treble adjustment BALANCE Balance adjustment Select STEREO, MONO, or SAP MUTE Select audio “OFF” or “ON” SPEAKER Select “internal”, “external”, or “Both” speakers AUDIO OUT Select SPDIF OUT for 2.1 channel or 5.1 channel RESET Select “NO”...
TV/HDTV SETTING: Function Name CABLE STD → CABLE IRC → ANTENNA TV SYSTEM AUTO SCAN Select “NO” or “YES” CHANNEL EDIT Select “ADD” or “DELETE” Select local time: LOCAL TIME “CANADA”, “EASTERN”, “CENTRAL”, “MOUNTAIN”, “PACIFIC”,”ALASKA”,“HAWAII”, “SAMOA”, “NEWFOUNDLAND” Day light saving: DAYLIGHT SAV On mode: “daylight saving “...
PARENTAL CONTROL: The parental controls feature prevents viewers from watching programs that are not age-appropriate, such as programs containing violence or adult language. Function Name The factory default password is “0000”. Use remote control to key PASSWORD in the number and enter the parental controls sub-menu. TV PG RATING Select “TV-MA”, “TV-Y”, ”TV-Y7”, ”TV-G”, ”TV-PG”, ”TV-14”, ”TV-MA”...
GENERAL SETTING: Function Name TRANSPARENCY Set OSD transparency level MENU POSITION OSD horizontal/vertical position adjustment SYSTEM INFO Display input source, type and signal Turn the closed caption OFF or CC1, CC2, CC3, CC4, CLOSED CAPTION TEXT1, TEXT2, TEXT3, TEXT4 LANGUAGE OSD language selection SLEEP TIMER Set sleep timer to turn off the power automatically...
LTV-32w4 HDC LCD TV Specifications Model Name Type Panel Color Viewing Angles Input Signal Video/Audio Output Signal HDTV Compatibility PC Compatible Recommended 1366 x 768 @ 60Hz Supported 1 12.7mm-high , Intermal Type , Slot Load Mechanism 2 Support ISO/IEC 11172 MPEG-1,13818 MPEG-2, 14496-2 MPEG-4 Video Sources...
Page 24
LTV-40w1 HDC LCD TV Specifications Model Name Panel Type Viewing Angles Input Signal Video/Audio Output Signal HDTV Compatibility PC Compatible Recommended 1366 x 768 @ 60Hz Supported 1 12.7mm-high , Intermal Type , Slot Load Mechanism 2 Support ISO/IEC 11172 MPEG-1,13818 MPEG-2, 14496-2 MPEG-4 Video Sources 3 Support Dolby Digital, MPEG-I/II Layer 1/2, PCM, LPCM, WMA Audio Formats DVD Player 4 Playback discs:...
Troubleshooting No Power • Make sure power button is ON (Blue LED ). • M ake sure AC power cord is securely connected to the AC socket. • Plug another electrical device (such as a radio) to the power outlet to verify that the outlet is supplying the proper voltage.
Page 26
• The setup may not match your TV system. No subtitle • Some discs have no subtitles. How Can I Find More Help? • Log on to: www.westinghousedigital.com • Contact Westinghouse Customer Service at (866) 287-5555 or write us at service@westinghousedigital.com...
Page 27
Westinghouse Digital Electronics SE-UM-3201-0501 Santa Fe Springs, CA...