Development Platform Quick Start; Tools Setup Sequence; Open Project And Start Debug - Fujitsu F2MC-8FX MB95390 Series Setup Manual

3 Development Platform Quick Start

3.1 Tools Setup Sequence

Start the debugging system in the following sequence:
Connect a BGMA to the PC using a USB cable, confirm the LED on the BGMA is Green;
Connect an EV board to BGMA IDC10 socket;
Power on EV board power supply, confirm the LED on the BGMA is orange.

3.2 Open Project and Start Debug

Users can start a debug from a PC software SOFTUNE workbench in the following
sequence. Here take IO_TEST project for example.
Start the SOFTUNE from "Startup Menu>Programs> SOFTUNE V3> FFMC-8L Family
SOFTUNE Workbench" in Windows;
Click "Open workspace" from "File" Menu in SOFTUNE;
Select "IO_TEST.wsp" in "Open Space" window;
Click "Start debug" from "Debug" Menu.
If the entire procedure goes right, a debug will start normally.
EV Board MB2146-441-E Setup Guide
Chapter 3 Development Platform Quick Start
Page 14