Project Start-Up - Fujitsu SK-96380-120PMT User Manual

6.2 Project Start-up

In order to allow a quick and smooth project start-up Fujitsu Microelectronics Europe
supplies a template project as a reference. The easiest way to start a new project is to make
a copy of the template project and use this copy as a start-up. The template includes the
latest start.asm file, MCU header file, IRQ table, basic linker and C-Compiler settings.
Note:
In any case the settings done in the template must be checked and have to be
adjusted to the specific needs and settings of the final application. The template is
providing an example for building up a new project.
THIS SAMPLE CODE IS PROVIDED AS IS AND IS SUBJECT TO ALTERATIONS. FUJITSU
MICROELECTRONICS ACCEPTS NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS
OR/ELIGIBILITY FOR ANY PURPOSES.
6.2.1 Create a New Project:
1. In order to start a new user-project use the 96380_template project
2. Copy the folder 96380_template-vXX and rename the folder to e.g. my_application
3. Enter the folder my_application
Rename mb96380_template.prj into my_application.prj
Rename mb96380_template.wsp into my_application.wsp
4. Edit my_application.prj
Replace all mb96380_template entries to my_application
5. Edit my_application.wsp
Replace all mb96380_template entries to my_application
© Fujitsu Microelectronics Europe GmbH
SK-96380-120PMT User Guide
Chapter 6 Getting Started
(C) Fujitsu Microelectronics Europe GmbH
- 31 - FMEMCU-UG-960001-15