To Configure The Manage Raid Tab - Western Digital WD ShareSpace User Manual

To configure the Manage RAID tab:

Warning!
Be sure to back up all data before configuring RAID. All data
stored in the hard drive is lost when changing the RAID configuration.
1. Click the Manage RAID tab on the Volumes & Raid Management page.
2. Select a RAID configuration
DataVolume is the default volume.
If the volume RAID type is JBOD, and there are new disks in the system, the
Extend icon appears on the side of the Volume Management table.
3. Click Submit.
NETWORK STORAGE MANAGER: ADVANCED MODE - 138
WD SHARESPACE
USER MANUAL