To Set Up Automatic Email Notifications - Western Digital WD ShareSpace User Manual

To set up automatic email notifications:

1. On the Alerts Setup page on the System tab, click Enable next to Email
Notification. The page displays additional fields.
2. In the SMTP Server field, enter the name or IP address of the SMTP server used
for email. (Check with your Internet Service Provider (ISP) for the SMTP server
settings, which may include the SMTP port, and ask whether to enable TLS/SSL
or SMTP authentication.)
3. In the Email Return Path field, enter a valid return email address recognized by
your ISP. For example, if your SMTP server is "smtp.myisp.net", then you should
enter a valid return email path address of the form "myname@myisp.net".
4. In the Email Recipients field, enter the email address where you want to send
an email message when an event occurs. Up to five email addresses can be used
at a time.
5. Click Send Test Mail to send a test alert and confirm your settings are correct.
A test message will be sent to each entered email address.
6. Click Submit.
NETWORK STORAGE MANAGER: ADVANCED MODE - 112
WD SHARESPACE
USER MANUAL