Checking The Firmware; Obtaining And Installing The Fortigate Firmware - Fortinet Wireless Starter Kit Manual

FortiAP™ Wireless Starter Kit

Checking the firmware

Obtaining and installing the FortiGate firmware

Wireless Starter Kit Guide
01-420-139115-20110223
http://docs.fortinet.com/ • Feedback
You need to verify that the units have the appropriate firmware installed. If the firmware is
not correct, you can download and install appropriate firmware.
To verify the FortiGate unit firmware
1 Connect a computer to one of the Internal ports.
2 Use a browser to connect to http://172.16.1.1.
3 Log in with user name "Admin" and password "fortinet".
4 Go to System > Dashboard > Status and check the Firmware version in System
Information.
If the build number is not 6390, see
next.
To verify the FortiAP unit firmware
1 On the FortiGate unit, go to Wireless Controller > Configuration > Access Points.
2 The FortiAP units should be listed. If necessary, select Refresh.
3 If the Version column does not show build 112, see
FortiAP firmware" on page
In FortiOS 4.0 MR2, only build 6390 supports wireless controller functionality. If your
FortiGate does not already have this firmware loaded, you need to download build 6390
from the Customer Support web site.
To get the wireless controller firmware for your FortiGate unit
1 Log on to the Support web site at https://support.fortinet.com/.
2 Go to Download > Firmware Images.
3 Select FortiAP > v4.00 > 4.0MR2 > MR2_Patch_2 > Wireless_controller.
4 Download the firmware build for your FortiGate model.
"Obtaining and installing the FortiGate
10.
Checking the firmware
firmware",
"Obtaining and installing the
9