Rear Panel; Front Panel - Fortinet Wireless Starter Kit Manual

FortiAP unit overview

Rear panel

Front panel

6
All connections to the FortiAP unit are made on the real panel.
In typical use as a wireless access point, only Port 0 is used. An Ethernet cable connects
Port 0 to a port on the FortiGate unit. The Power jack is connected to the power supply
provided with the FortiAP unit. Optionally, you can use a power-over-Ethernet (POE)
adaptor to avoid the need for a power outlet near the FortiAP unit. In that case, the power
output of the POE adaptor connects to the Power jack.
The front panel contains indicators that show the status of the unit.
Port 1, 2, 3, 4 Green indicates a connection to the corresponding port on the rear panel.
Wireless Flashing indicates wireless network running.
Port 0 Green indicates a network connection to Port 0 on the rear panel.
Port 0 connects to the FortiGate unit that acts as the wireless controller.
Power Flashing - power connected but unit not managed.
Lit steadily - indicates that the unit has power and is managed.
FortiAP™ Wireless Starter Kit
Wireless Starter Kit Guide for FortiOS 4.0 MR2
01-420-139115-20110223
http://docs.fortinet.com/ • Feedback