Advertisement
Remote Control Functions (Fig. 2)
Fig. 2
Temperature
Down
Dimmer
Down/
Firelight Off
Flame Speed
Down
Slow Start/
Fading
Embers Off
Purefire
TM
Low Speed
Flame & Heat
On/Off
Flame / Heat On/Off Button
Press the "Flame/Heat On/Off "button
function On. When the "Set Temperature" is higher then the "Room
Temperature" the heat will come on. To turn the heat off, lower the
"Set Temperature" so that it's setting is lower then the "Room
Temperature". The default temperature setting is 72°F (22°C).
NOTE:
When using the remote control the heater runs on a thermostat. Press
the "Temperature Up" or "Temperature Down" button to adjust the
set temperature. Once the desired set temperature is reached the
© 2008 Dimplex North America Limited
Room Temperature
Set Temperature
Temperature Up
Dimmer Up Control
Dimmer Up/Firelight On
Flame Speed Control
Flame Speed Up
Fading Embers On/Timer
Cycle
Slow Start/Fading
Embers Control
Purefire
High Speed
TM
Purefire
Speed
TM
Purifire
On/Off
TM
to turn the Flame/Heat
7209210100REV01
Advertisement
