Advertisement
3. Set the 3 position manual control to the Remote position (left
position).
4. Press and hold the initialization button on the unit.
5. While holding the initialization button, press the flame/heat On/
Off
remote control transmitter.
6. Release the initialization button on the unit.
7. Press the Flame/Heat On/Off button
function On or press the Purifire™ On/Off button
Purifire™ function ON.
Frequency Interference
If the fireplace does not respond properly to the remote control, the
remote operating frequency may have to be reset. The remote control
can send another frequency code to the circuit board to eliminate
interference.
1. Simultaneously press the "Slow Start" button and the
"Purifire
2. "CODE" will appear.
3. Release the "Slow Start" button and the "Purifire
Speed" button.
4. Press and hold the initialization button on the unit.
5. Press the
button.
Your remote will now have a different frequency communicating
with the fireplace.
© 2008 Dimplex North America Limited
button or the Purifire™ On/Off
Low Speed" button on the remote control.
TM
button on the remote and release the initialization
button on the
to turn the Flame/Heat
to turn the
Low
TM
7209210100REV01
Advertisement
