Advertisement
Operation
Remote Control
The remote control has a range of approximately 50 ft. (15.25m), it
does not have to be pointed at the fireplace and can pass through
most obstacles (including walls). It is supplied with 243 independent
frequencies to prevent interference with other units.
Battery Installation (Fig. 1)
1. Depress tab on the battery cover on the back of the remote
transmitter and remove battery cover.
2. Install 2 AAA batteries into the remote control (included).
3. Ensure child lock is in the "unlocked" position.
4. Replace the battery cover.
Fig. 1
NOTE:
When the
recommended to replace the batteries promptly, to maintain full
functionality of the remote/fireplace. The remote transmitter has a
battery backup time of only several hours.
Initializing The Remote Control
1. Plug cord into 120 volt wall outlet.
2. Ensure the Main On/Off switch located in the switch box on the
fireplace in the upper right hand corner is in the
position.
© 2008 Dimplex North America Limited
Batteries
symbol is present on the remote control it is
On
7209210100REV01
Advertisement
