B) 'Cm/Inch Counter' Reading - Toshiba B-EP2 Counter Reading Manual

Industrial printer: B-SX4 / B-SX5 / B-SX6 / B-SX8

b) 'Cm/inch counter' reading

Note:
- FW update for 'cm/inch counter' may be required.
o B-SX4T Series, FW version: C5.8
o B-SX5T Series, FW version: C5.8
o B-SX6T Series, FW version: C1.6
o B-SX8T Series, FW version: C1.6
- The new/additional 'cm/inch counter' is available for use as soon as the new FW is
installed.
- There is no conversion of the previous counter reading in 0.1 km in
MAINTENANCE CONT.
- The '0.1 km' counter in MAINTENANCE CONT is not added to the 'cm/inch
counter.'
2. Press the [PAUSE] key.
4. Hold the [FEED] key down
until the counter is shown
on the display.
6. Press the [RESTART]
key to choose between
'cm' and 'inch.'
Example print:
.
.
TOTAL COUNTER LIST
- :
B-SX5T
S/N: 2302M130945
PRINTER 13341 cm
5252.5 inch
Page 11
1. The system is in ONLINE mode
when switched on.
3. [PAUSE] is shown on the display.
5. The counter is shown in 'cm' and
'inch' on the display.
7. Press the [PAUSE] key to print out
the counter reading. The Normal
mode in Step 1 is shown again
once printing is complete. If you do
not wish for the counter reading to
be printed, press the [FEED] key
to display the Normal mode in
Step 1.