Troubleshooting; Important Consumer Information - Kohler STRUKTURA K-5888T Installation Instructions Manual

Table of Contents

Advertisement

TROUBLESHOOTING

Please make following checks before repair:
Symptoms
No flushing
No flushing or poor
flushing
No flashing
If the trouble remains after above-mentioned actions are taken, please contact with us via distributor.

IMPORTANT CONSUMER INFORMATION

Consumer Responsibilities
1. Do not directly flush the sensor with water. The sensor is
an electronic instrument.
2. Keep away from strong electromagnetic field.
3. Clean the urinal with soft rag and neutral liquid detergent.
Do not use eradicator, abrasive powder or oil, acid or
alkali liquid detergent.
4. Urinal is designed for use with potable water. Avoid water
that includes a lot of contaminants or acid/alkali water and
impure water.
5. All electrical connection must be compliance with related
regulation and codes.
6. All installation staff should be well familiar with installation
instruction.
WARNING
Never spit phlegm and throw stub or
something else into the urinal.
Please avoid using articles either dissolvable or with
the diameter smaller than 5mm, such as moth ball.
WARNING: Risk of product damage.
Do not throw into the urinal what is easy to block it,
such as newspaper, paper pilch.
Do not bump the vitreous china with great force to
prevent it from damaging and leaking.
Do not use the product in the water below 0 C.
CAUTION: Please do not use hard materials (like
scouring pad) to clean product surface, especially the
product logo.
1237458-T01-A
Probable causes
1. No power or mistake connected.
2. Not able to detect the urine.
3. Out of electricity.
1. Adjusting bolt not fully open
2. Low water pressure.
3. Filter is obstructed.
1. The small hole of valve core is blocked.
2. The filter of valve core is blocked.
1.
2.
3.
1.
2.
3.
1.
2.
o
1. Check the power connect.
2. See user's guide.
3. Replace batteries.
1. Open the adjusting bolt.
2. Improve water supply.
3. Clean the filter.
1. Clean the small hole of valve core with
thin steel wire.
2. Wash the filter of valve core with a brush.
1.
2.
3.
1.
2.
3.
1.
2.
1.
2.
3.
4.
5.
6.
o
0 C
-11-
Corrective actions
5mm

Advertisement

Table of Contents
loading

Table of Contents