Putting The Radar Into Standby; Powering Down Your Radar Scanner - Raymarine LightHouse Sport Basic Operation Instructions

Transmitting
If your radar scanner is connected, powered up and transmitting
then the radar image is displayed and echoes returns are displayed
onscreen.

Putting the radar into standby

With your selected radar displayed onscreen:
1. Select Transmit from the main menu.
The radar scanner will stop transmitting and is put into standby
mode.

Powering down your radar scanner

With your radar scanner in standby mode:
1. Select the Off icon.
2. Select Yes to confirm power down.
The radar scanner will still consume a small amount of power whilst
it is powered off, this is to ensure the radar can be powered back
up quickly.
64