How Do I Open Or Close A Bs2000 Dialog - Fujitsu BS2000 SE Series Quick Manual

3.5 How do I open or close a BS2000 dialog?

Requirement
Login into the SE Manager as administrator, BS2000 administrator or a privileged operator.
The BS2000 system has started up and BS2000's data communication system has started.
Procedure
> Iconize the opened console window and switch once more to the main window of the SE Manager. That is
where the Operation
note of "Logging out because of a session timeout"
Console and dialog
> In the
A BS2000 dialog window opens and requests the login to the BS2000 system:
After you have logged in successfully using the /SET-LOGON-PARAMETERS command, you can enter commands
and perform your tasks in BS2000.
i To complete an entry, click the DUE1 key in the key panel of the virtual keyboard or press the Enter key
on your keyboard.
Terminating a BS2000 dialog and closing the dialog window
Proceed as follows to close the dialog window:
> Terminate your dialog task using the /EXIT-JOB command (or /LOGOFF).
BS2000 terminates your task and the connection to BS2000 is cleared.
> Respond to the request
tab of the BS2000 system which was previously started was most recently opened (take
Open
group, click by the
PLEASE ACKNOWLEDGE
).
BS2000 dialog
function.
by pressing the Enter key.
26