How Do I Open Or Close A Bs2000 Dialog - Fujitsu BS2000 SE Series Manual

Powering on, starting up BS2000, powering off

3.4 How do I open or close a BS2000 dialog?

Requirement
Logging into the SE Manager as administrator, B2000 administrator or a privileged
operator.
The BS2000 system has started up and BS2000's data communication system has
started.
Procedure
Iconize the opened console window and switch once more to the main window of the
Ê
SE Manager. That is where the Operation tab of the BS2000 system which was
previously started was most recently opened (take note of
session timeout" on page
In the Console and dialog group, click Open in the BS2000 dialog function.
Ê
A BS2000 dialog window opens and requests the login to the BS2000 system:
After you have logged in successfully using the /SET-LOGON-PARAMETERS command,
you can enter commands and perform your tasks in BS2000.
I
U41857-J-Z125-2-76
To complete an entry, click the [DUE1] key in the key panel of the virtual keyboard
or press the Enter key on your keyboard.
8).
Opening the BS2000 dialog
"Logging out because of a
23