Fujitsu BS2000 SE Series Quick Manual page 24

> Enter the value 1 to display the menu containing the IPL functions for starting BS2000:
Start BS2000
==================================================================================
0 - Back to main menu
1 - Execute with current parameters
2 - Execute with preset parameters
3 - Execute with current parameters and save into preset parameters
Change params:
a - IPL load device:
b - Consol device:
c - Startup mode [a|d|f]:
d - BS2000 systemname:
e - Clear BS2000 memory [y|n]:
==================================================================================
Please enter value:
The menu shows, among other things, the (current and preset) load disk (also called IPL or boot disk) of
BS2000. As the Server Unit was rebooted, the boot disk from the auto IPL configuration is set. This can differ
from the boot disk of the last IPL. If necessary, use menu item
i Initial startup from the boot disk requires a DIALOG startup. For this purpose the value
for the IPL parameter
1
> Enter the value to save the settings and start the IPL. This action closes the KVP menu and the current
console messages are displayed.
> Take note of the console messages and answer the question messages.
As a large number of messages are output one after the other, question messages can also quickly "disappear".
The /SHOW-PENDING-MSG (or /STATUS MSG) command enables you to have all the open question
messages displayed again.
As soon as the message NSI0000 displays "System ready", startup of BS2000 has already been largely completed.
You can continue to observe the current BS2000 session on the console and, when necessary, react to system
messages (e.g. reply to a mount message).
The F3 and F4 keys enable you to scroll backward and forward in the history of the console inputs. Pressing
::c
Ctrl + d or entering terminates the console.
For more extensive administration tasks in BS2000, you must log in on BS2000, see
close a BS2000 dialog?" .
As an alternative to the procedure described above, you can also boot a BS2000 system in the SE Manager with
BS2000 IPL
the action. See the description in
Startup mode
. If necessary, select this value using menu item .
section "How can I boot the BS2000 via the SE Manager?"
current preset parameters
9908 9908
Z0 Z0
a f
ABGAFR01 ABGAFR01
n n
a to select a different boot disk.
section "How do I open or
d must be set
c
.
24