Non-redundant host and drive loops
The following illustration shows examples of configurations that have non-redundant
host and drive Fibre Channel. These configurations have a single path on the host
and drive Fibre Channel loop. If either path fails, the host is not able to access storage
until the path is repaired. The single controller (Model 3542-1RU) configurations have
a single Fibre Channel loop to the hard disk drives. These configurations have no
path failover protection.
Host system
Host system
Host system
with one host
with one host
with one host
adapter
adapter
adapter
Managed hub
or switch
Single path for
multiple hosts
3542-1RU
3542-1RU
Host system
Host system
with one host
with one host
adapter
adapter
3542-2RU
Figure 5. Non-redundant host and drive Fibre Channel loop configurations
14
IBM FAStT200 and FAStT200 HA Storage Servers Installation and User's Guide