Network Cables - NEC Express5800 SIGMABLABE User Manual

Network Cables

Your network cables must have the following specifications:
N8406-037F 10GBase-SR SFP+ module
Connector
Type of Cable
Cable Length
(max.)
N8406-053F 40GBase-SR QSFP+ module
Connector
Type of Cable
Cable Length
(max.)
IMPORTANT:
・
・
・
・
・
・
・
・
N8406-039F 1000Base-T SFP module
Connector
Type of Cable
Regulation
Cable Length
(max.)
IMPORTANT: This product supports 1000Mbps/Full Duplex only .
LC connector
Multimode Fiber (MMF) cable
Core size: 50um
OM3 class 300m max (when the core size is 50μm)
MPO connector
Multimode Fiber (MMF) cable
Core size: 50um
OM3 class 100m max (when the core size is 50μm)
Contact your service representative for placing optical fiber cables.
Experts must place the cables.
Handle optical fiber cables carefully.
Keep more than 50 mm by a bending radius when you bend an
optical fiber cable.
Install the cable to the connector straight. Do not force to install the cable
to avoid damage it.
Make sure that the connector of the cable is clean and is not
damaged.
Make sure that your cable meets specifications for the use of the XFP
module.
Do not come into contact with contamination.
Do not give any impact or pressure to the cable and its connector. Do
not step on the cable or put something heavy on it.
RJ-45
UTP/STP twisted-pair cable
Eight wicks, four pairs
1000Base-T
100m
EIA/TIA standard
Category 5e or higher
(English)
57