Alfa Romeo 4C Owner's Handbook Manual page 72

❒ hold down the SET/
again to go back to the standard
screen or to the main menu
according to the menu options where
you are in.
Unit of measurement
(Setting the unit of
measurement)
With this function it is possible to set
the unit of measurement using three
submenus: "Distances", "Consumption"
and "Temperature".
To set the desired unit of measurement,
proceed as follows:
❒ press button SET/
display will show the three
submenus;
❒ press button
through the three submenus;
❒ once the submenu to be modified
has been selected, briefly press
the SET/ button;
❒ if the "Distances" submenu is
selected and the SET/
pressed briefly, the display shows
"km" or "mi" depending on the
previous setting;
❒ press
or to make your choice;
68
❒ if the "Consumption" submenu is
button
selected and the SET/
is pressed briefly, the display shows
"km/l", "l/100km" or "mpg"
depending on the previous setting. If
the measurement unit set for
"Distances" is "km", the display
allows the measurement unit ("km/l"
or "l/100km") for Consumption to
be set. If the measurement unit set
for "Distances" is "mi", the display will
show Consumption in "mpg";
❒ press
❒ if the "Temperature" submenu is
selected and the SET/
briefly. The
pressed briefly, the display shows
"°C" or "°F" depending on the
previous setting;
❒ press
or to scroll
When you have made the required
settings, briefly press the SET/
screen or hold the button down to go
back to the main menu screen without
saving.
button is
Hold down the SET/
to go back to the standard screen or to
the main menu according to the menu
options where you are in.
button
or to make your choice;
button is
or to make your choice;
button to go back to the submenu
button again
Language (Language
selection)
Display messages can be shown in
different languages: Italian, English,
German, Portuguese, Spanish, French,
US English, Mexican Spanish, Russian
and Chinese.
To set the desired language proceed as
follows:
❒ press button SET/
briefly. The
"language" set previously flashes
on the display;
❒ press
or to make your choice;
❒ briefly press the SET/
to go back to the menu screen or
hold the button down to go back to
the standard screen without saving.
Warnings volume
(Adjusting the
failure/warning buzzer
volume)
With this function the volume of the
buzzer which accompanies the display
of failure/warning can be adjusted
according to 8 levels.
To set the desired volume proceed as
follows:
❒ press button SET/
briefly. The
volume "level" set previously flashes
on the display;
button