Refuelling The Car - Alfa Romeo 4C Owner's Handbook Manual

REFUELLING THE
CAR
IN BRIEF
The car features the "Fast Fuel"
system, which prevents refuelling
with incorrect fuels (e.g. diesel for a
petrol engine).
Stop the engine before refuelling.
Only refuel with unleaded petrol with
octane rating (RON) not less than
95, in compliance with the European
specification EN228. In particular,
the 4C's engine has been designed
to comply with all emission limits
while simultaneously guaranteeing
minimal consumption and maximum
performance, using premium-quality
unleaded petrol with octane rating
(RON) of 98 or higher.
In order to prevent damage to the
catalytic converter never introduce
even the smallest amount of leaded
petrol, even in the event of an
emergency.
IMPORTANT An inefficient catalytic
converter leads to harmful exhaust
emissions, thus contributing to air
pollution.
58
IMPORTANT Never introduce leaded
petrol to the tank, even in small
amounts in an emergency, as this
would damage the catalytic converter
beyond repair.
FILLING THE TANK
To ensure that you fill the tank
completely, top up twice after the first
click of the fuel supply gun. Avoid
further top-ups, which could cause
faults in the fuel supply system.
REFUELLING
PROCEDURE
The car features a "Fast Fuel" device,
integrated with the opening for the fuel
tank: it opens and recloses
automatically when the fuel supply gun
is inserted/removed.
The "Fast Fuel" device is provided with
an inhibitor which prevents refuelling
with incorrect fuel.
The refuelling procedure described
below is illustrated on the label fig. 56
located inside the fuel flap. The label
also indicates the fuel type (UNLEADED
FUEL=petrol).
56
Procedure
❒ open flap A fig. 57, pulling it
outwards;
❒ introduce the dispenser in the filler
and refuel;
❒ after refuelling, before removing the
dispenser, wait for at least 10
seconds in order for the fuel to flow
inside the tank;
❒ then remove the dispenser from the
filler and close flap A.
Flap A fig. 57 is provided with a dust
cover gaiter B which prevents deposits
of impurities and dust at the end of
the filler when the flap is closed.
55) 56) 57)
A0L0045