Telephone Settings >> Features - Alcatel-Lucent H2 DeskPhone User Manual

H2 DeskPhone
H2P DeskPhone
12.7 Telephone settings >> Features
Configuration of telephone features.
Parameters
Basic Settings
Enable Call Waiting
Enable Call Transfer
Semi-Attended Transfer
Enable 3-Way Conference
Enable Auto Onhook
Auto HangUp Delay
Ring From Headset
Enable Auto Headset
Enable Silent Mode
Disable Mute for Ring
Enable Default Line
Enable Auto Switch Line
Default Ext Line
Ban Outgoing
Hide DTMF
Enable Call Log
Enable Restricted
Incoming List
Enable Allowed Incoming
List
8AL90394ENAAed01
Table 22 - General Function Settings
Description
Enables this setting to allow user to take a second incoming call during an
established call. Default enabled.
Enables call transfer.
Enables semi-attended transfer when selected.
Enables 3-way conference when selected.
The telephone will hang up and return to idle automatically in hands-free
mode.
Specifies Auto Onhook time. The telephone will hang up and return to idle
automatically after Auto Hand down time in hands-free mode, and play dial
tone Auto Onhook time in handset mode.
Enables Ring from Handset when selected. The telephone plays the ring
tone from the handset.
To enable this feature, the headset is plugged into the telephone, the user
presses the 'answer' key or line key to answer a call with the headset
automatically.
When enabled, the telephone is muted and there is no ringing when calls
come in. You can use the volume keys and mute key to unmute.
When this is enabled, you cannot mute the telephone.
If enabled, the user can assign a default SIP line for dialing out rather than
SIP1.
Enables the telephone to select an available SIP line as default
automatically.
Selects the default line to use for outgoing calls.
If you select Ban Outgoing to enable it, and you cannot dial out any
number.
Configures the hide DTMF mode.
Selects whether to save the Call Log.
Selects whether to enable restricted call list.
Selects whether to enable the allowed call list.
90 /111