33. Locate the Leg Lever Cable (96). Route the
eyelet end of the Cable through the Right Leg
(73) and attach it to the Leg Lever (4) with a 5/16"
x 1" Shoulder Bolt (78) and a 5/16" Nylon Locknut
(71).
34. Attach a 3 1/2" Pulley (38) inside the Right Leg
(73) with a 3/8" x 2 3/4" Bolt (81), two 3/8"
Washers (75), two 1/2" Spacers (34), and a 3/8"
Nylon Locknut (70).
35. Route the Leg Lever Cable (96) through the Right
Upright (6) and around a 3 1/2" Pulley (38).
Attach the Pulley inside the Upright with a 3/8" x
2 3/4" Bolt (81), two 3/8" Washers (75), two 1/2"
Spacers (34), and a 3/8" Nylon Locknut (70).
36. Wrap the Leg Lever Cable (96) around a 3 1/2"
Pulley (38). Attach the Pulley and a Cable Trap
(91) to the second set of holes from the bottom of
the indicated Double "U"-Bracket (56) with a 3/8"
x 2" Bolt (62) and a 3/8" Nylon Locknut (70). Be
sure the Cable Trap is turned to hold the
Cable in the groove of the Pulley.
33
4
71
73
96
78
34
70
75
34
35
96
36
70
91
15
38
73
75
34
81
70
34
75
38
6
34
75
81
56
62
38
96