Remote Access - VTech CL6527A User Manual

REMOTE ACCESS

A two-digit security code is required to access the answering
system remotely from any touch-tone telephone. The
default code is 00.
NOTE
• Remote access can only be used if this function is activated.
1. Dial your telephone number from any touch-tone
telephone.
2. When the answering system answers, press * and then
enter the two-digit remote access code.
3. Then you can enter one of the following remote
commands.
Command
2
4
44
5
6
7
9
NOTES
• After 5 seconds of key inactivity, the answering machine
automatically cuts off communication.
• When the answering machine is turned off, the telephone
answers after 14 rings, and plays the recording corresponding
to the answering machine only mode.
Delete message.
Repeat the current message.
Return to the previous message.
Play or stop playing the current message.
Skip to the next message.
Turn on the answering system.
Turn off the answering system.
64
Description