Chapter 3 Piano Assembly; Piano Assembly - Kurzweil MP15 User Manual

Chapter 3
- Assembly should be carried out by at least two persons.
- Assemble the stand on a hard and flat floor with ample space.
- Be sure to use the included screws, and insert screws of the correct size in the correct
hole locations. Use of incorrect screws can damage the product.
1)
7
4
2)
5
8
9
1. Place the pedal box
4
panel and use screws to fasten
2
7
the side panel.
2. Place the pedal box
4
panel and use screws to fasten
3 7
the side panel.
3. You can find the pedal cable in the
④
pedal box . Untie and straighten out
the bundled pedal cable.
1. Fit into the rear panel's hole in the side
panel brackets and then use the screws
to fasten the rear panel.
8
2. Use the screws to fasten the bottom
9
of the rear panel.
Attach the pedal cord holders to the rear panel
as shown, then clip the cord into the holders
on the left side
on the right side

Piano Assembly

9