Registering An E-Mail Destination - Ricoh MP CW2201 User Manual

8. Press [Sender Name], select the e-mail sender, and then press [OK].
9. To use Message Disposition Notification, press [Recept. Notice].
If you press [Recept. Notice], the selected e-mail sender will receive e-mail notification when
the e-mail recipient has opened the e-mail.
10. Place the originals.
If scanning does not start automatically, press [Start].

Registering an E-mail Destination

1. Press [Home] ( ) at the bottom of the screen in the center.
2. Flick the screen to the left, and then press the [Address Book Management] icon.
3. Check that [Program / Change] is selected.
4. Press [New Program].
5. Press [Change] under "Name".
The name entry display appears.
6. Enter the name, and then press [OK].
7. Press [ Next].
8. Press the key for the classification you want to use under "Select Title".
The keys you can select are as follows:
• [Frequent]: Added to the page that is displayed first.
• [AB], [CD], [EF], [GH], [IJK], [LMN], [OPQ], [RST], [UVW], [XYZ], [1] to [10]: Added to the
list of items in the selected title.
You can select [Frequent] and one more key for each title.
9. Press [Email].
Basic Procedure for Sending Scan Files by E-mail
123