Table of Contents
Advertisement
HOW TO STEAM USING APPLIANCE
MAX FILL
LINE
ELEMENT
DRAIN VALVE
DRAIN
VALVE
VALVE
SPOUT
CAVITIES
•
Add water to Max Fill Line. Do not add water past
this line. Do not allow water to completely evaporate.
This will cause element to overheat and damage the
unit. Make sure basket is in place, as shown on left,
to steam.
•
Water will boil at 212°F (100°C).
•
Valve must be in OFF position.
•
Remove safety cap on drain valve.
•
Screw valve spout attachment onto drain valve. Do not
overtighten. This could damage threads and cause leakage.
IIIf spout becomes snug in the up position turn counterclock-
wise until it is in the down position.
•
Align spout over container with opening facing downward.
Open valve to drain.
•
Close valve when complete.
•
Unused oil may be stored in appliance. Do NOT store water
in appliance.
CAVITIES
•
Cavities in unit are designed to catch grease and
condensation from steam. Wipe out cavities using
damp cloth after each use.
•
When steaming, cavities may become full before
finished cooking, drain with sponge or other
absorbent material. Caution! Water will be hot.
8
Hide quick links:
Advertisement
Table of Contents
