IKEA LAGAN Manual page 11

ENGLISH
programme button increases the level
number. After reaching level 10, the
count starts again from level 1.
4. Press the on/off button to confirm the
setting.
Acoustic signals
Acoustic signals sound when a malfunction
of the appliance occurs. It is not possible to
deactivate these acoustic signals.
There is also an acoustic signal that sounds
when the programme is completed. By
default, this acoustic signal is activated and
it is possible to deactivate it.
In addition, an acoustic signal will sound
before the AutoOpen will open the door.
This acoustic signal stops only if AutoOpen
is deactivated.
How to deactivate the acoustic signal for
the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
the programme button until the
indicator flashes and indicators
and are on.
2. Press the programme button
immediately.
• The indicator
• The indicator
3. Wait until the indicator
are off. The indicator
• The indicator shows the current
setting:
4. Press the programme button to change
the setting.
• off = Acoustic signal off.
5. Press on/off confirm the setting.
and are on.
flashes.
and
still flashes.
on = Acoustic signal on.
AutoOpen
AutoOpen improves the drying results with
less energy consumption.
During the drying phase, the
door opens automatically and
remains ajar.
Caution! Do not try to close the
appliance door within 2 minutes
after automatic opening. This can
cause damage to the appliance.
AutoOpen is automatically activated with
all programmes excluding
To avoid possible hazards inside
the appliance (such as knives,
sharp objects or chemicals) for
children, pets or people with
disabilities deactivate the
function.
How to deactivate AutoOpen
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
the programme button until the
indicator flashes and indicators
and are on.
2. Press the programme button twice.
11
.