Operation - Weed Eater 545186761 Instruction Manual

Shield
Cutting Head
Motor Housing
3. Keep front locking tab in the motor housing.
Cutting Head
Shield
KNOW YOUR TRIMMER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT.
Compare the illustrations with your unit to familiarize yourself with the location of the various controls
and adjustments. Save this manual for future reference.
Trigger Switch
Cord
Retainer
Recessed
Plug
RECESSED PLUG
The RECESSED PLUG is where you attach
your extension cord to the unit.
TRIGGER SWITCH
The TRIGGER SWITCH is used to turn on the
unit. Squeeze the trigger switch to operate the
unit. Release to stop.
LINE LIMITER BLADE
The LINE LIMITER BLADE cuts the cutting
line to the proper cutting length.
ASSIST HANDLE
The ASSIST HANDLE is used to help hold
and guide the unit.
4. Push shield toward motor housing until
Opening for rear locking tabs snap into rear notches.
Front
An audible snap must be heard. Ensure
Locking Tab the cutting head remains free to rotate
and the line is not caught between the
shield and the motor housing.
Shield

OPERATION

Assist Handle
Twist and Edge Button
Locking
Sleeve
Air
Assembly
Vents
Debris Shield
Line Limiter Blade
TRIMMER HEAD
The TRIMMER HEAD holds the cutting line
and rotates during operation.
TWIST AND EDGE BUTTON
The TWIST AND EDGE BUTTON is used to
twist the lower portion of the unit into an edg-
ing position.
EDGE GUIDE
The EDGE GUIDE protects the unit from con-
tacting the ground during edging.
5
Motor Housing
Edge Guide
Trimmer Head
with 0.065 inch
Trimmer Line