Table of Contents
Advertisement
Quick Links
Product Name: External Shock Lanyards
Part #: 01205; 01206; 01214; 01215; 01217; 01218; 01220; 01221; 01223; 01230; 01231; 01237;
01240; 01241; 01242; 01243; 01245; 01246; 01275; 01285; 01290; 01291; 11520; 11730; 11740;
11750; 11760; 11830; 11840; 11855; 11865; 11900; 11901; 11902; 11903; 20091; 21210; 21214
Instruction Manual
Do not throw away these instructions!
Read and understand these instructions before using equipment!
1
1
1
2
2 - 3
3 -4
4
5
5
5
6
7
Advertisement
Table of Contents
Related Manuals for Guardian 01205
Summary of Contents for Guardian 01205
-
Page 1: Table Of Contents
Product Name: External Shock Lanyards Part #: 01205; 01206; 01214; 01215; 01217; 01218; 01220; 01221; 01223; 01230; 01231; 01237; 01240; 01241; 01242; 01243; 01245; 01246; 01275; 01285; 01290; 01291; 11520; 11730; 11740; 11750; 11760; 11830; 11840; 11855; 11865; 11900; 11901; 11902; 11903; 20091; 21210; 21214... -
Page 2: Introduction
Introduction Thank you for purchasing a Guardian Fall Protection External Shock Lanyard. This manual must be read and understood in its entirety, and used as part of an employee training program as required by OSHA or any applicable state agency. -
Page 3: Product Specific Applications
Product Specific Applications Use of equipment in unintended applications may result in serious WARNING injury or death. Maximum 1 attachment per connection point. Personal Fall Arrest: External Shock Lanyards may be used to support a MAXIMUM 1 personal fall arrest system (PFAS) for use in Fall Arrest applications. Structure must withstand loads applied in the directions permitted by the system of at least 5,000 lbs. -
Page 4: Components And Specifications
All webbing is made of polyester and nylon, and is 1” in width. All connectors (snap hooks, carabiners, and rebar hooks), are made from steel or aluminum. Contact Guardian Fall Protection with any questions regarding specific lanyard components or composition. -
Page 5: Installation And Use
Double Leg Tie-Back Lanyard w/Snap Hooks and Adjustable D-Rings Installation and Use 1. Prior to use, inspect Guardian External Shock Lanyards and all PFAS equipment to be used in combination with External Shock Lanyards. 2. Make considerations for eliminating or minimizing swing fall hazards. -
Page 6: Maintenance, Cleaning, And Storage
If an External Shock Lanyard fails inspection in any way, immediately remove it from service and contact Guardian to inquire about its return or repair. Cleaning after use is important for maintaining the safety and longevity of External Shock Lanyards. Remove all dirt, corrosives, and contaminants from External Shock Lanyards before and after each use. -
Page 7: Safety Information
Safety Information Failure to understand and comply with safety regulations may result in serious injury or death. Regulations included herein are not all-inclusive, WARNING are for reference only, and are not intended to replace a Competent Person’s judgment or knowledge of federal or state standards. Do not alter equipment. -
Page 8: Labels
Labels Shock Absorbing WARNING! Lanyard: Compliant with Make only safe Follow manufacturer’s all applicable and compatible instructions provided ANSI Z359.13-13, connections. with this lanyard at ANSI A10.32-12, time of shipment OSHA 1910, and from manufacturer. OSHA 1926 Subpart M For use only with Fully read and requirements.