How To Connect Hybrid Recorder; Connection; Setting Of Hybrid Recorder - Sony BKNW-116 Installation Manual

1-7. How to Connect Hybrid Recorder

1-7. How to Connect Hybrid Recorder

1-7-1. Connection

Preparations
Disk array cable: 1-769-670-31
(Supplied with this unit)
SCSI terminal connector: 1-774-818-11
(Supplied with hybrid recorder)
Use the specified cable and connector. If not, the operation
may become unstable.
Procedures
n
Turn off the power before connecting.
1. Disconnect the SCSI terminal connector from SCSI
connector of the hybrid recorder.
2. As shown in the figure, connect this unit to the hybrid
recorder with disk array cable.
n
Fix the connector of the cable securely with two fixing
screws.
3. Attach the SCSI terminal connector disconnected from
the hybrid recorder to SCSI connector which is not
connecting the cable.
n
Fix the terminal connector securely with two fixing
screws.
<Rear side>
BKNW-116
SCSI SCSI
Terminal connector Disk array cable (1.5 m)
1-8 (E)

1-7-2. Setting of Hybrid Recorder

It is required to change the setting of the hybrid recorder to
use this unit
Refer to the operation manual of the hybrid recorder for
setting.
n
If the way of setting is not described in your operation
manual, contact your local Sony Sales Office/Service
Center.
Hybrid recorder
SCSI
BKNW-116