Maintenance - Honeywell Krom Schroder BCU 580 Technical Information

Maintenance

17 Maintenance
The fail-safe outputs (valve outputs V1, V2, V3 and V4)
of the power module are monitored for correct func-
tioning. In the event of a fault, the system is set to a safe
status using a second shut-down method (isolation of
the valve outputs from the mains). In the event of a de-
fect (e.g. fault 36), the power module must be replaced.
See www.partdetective.de
(optimized for smartphones)
for a replacement/order option for the power module.
The device and user statistics can be displayed using
the operator-control unit OCU or engineering tool BC-
Soft for further diagnostics and troubleshooting. The
user statistics can be reset using engineering tool BC-
Soft.
BCU 580 · Edition 11.15l 125