Weber 43721 Owner's Manual page 33

WARNING : The gas connections of your Summit
gas grill have been factory tested. We do however
recommend that you leak check all gas connections
before operating your Summit
Remove control panel
Part required: Phillips Screwdriver.
Remove the burner control knobs (1). The screws (2) need
to be removed from the control panel (3) before the control
panel is removed from the grill.
(1)
(1)
Gas Instructions
® gas grill.
(2)
(3)
(2)
(3)
®
Put your fingers under the front edge of the control panel
and lift off.
Completely remove the control panel (4) from the cooking
box assembly exposing the valves, burners, igniter, and
manifold.
(2)
(2)
C-3
(4)
(4)