Weber SPIRIT 700 LX Series Owner's Manual page 21

Step 22
Complete accessory installation
You will need: work table, two accessory racks, warming
rack, three tubing plugs and thermometer.
Set the accessory rack across the bottom braces in front
of the frame connector. Figure 29 (a).
Set the second accessory rack across the bottom braces
in the back of the frame connector. Figure 29 (b).
Open the lid and set the warming rack into the slots at the
rear of the cooking box. Figure 29 (c).
Set the work table onto the left side rails. Figure 29 (d).
Insert the thermometer into its holder. Figure 29 (e).
Insert the tubing plugs into the ends of the frame. To fully
seat the plugs, you may have to tap them lightly with a
hammer. Figure 29 (f).
(e)
(d)
(c)
(b)
(a)
(f)
Figure 29
21