Connect Your Devices To The New Router; Set Up The New Router For Internet Access - Tenda AC21 Quick Installation Manual

II. Connect your devices to the new router
Method 1: Connect your WiFi-enabled device (such as a smart phone) to
the new router's WiFi network using the SSID labeled on the
bottom of the router. There is no WiFi password by default.
Tenda_XXXXXX
Method 2: Connect your wired device (such as a computer) to port 1, 2,
IPTV/3 of the router using an Ethernet cable. The LAN LED
indicator lights up.
Ethernet cable
Setting
Tenda_XXXXXX
WPS/RST IPTV/3 2 WAN POWER
1
Ethernet cable
III. Set up the new router for internet access
1. Start a web browser on a device that has connected to the router,
and visit tendawif i.com.
tendawif i.com
Tips
If you cannot log in to the web UI of the router, refer to Q1 in FAQ.
2. Click Start.
Quick Setup Wizard
3. The router detects your internet connection type automatically.
Set required parameters and click Next.
Please select your connection type.
As detected, your connection type may be: PPPoE
Connection Type:
PPPoE
ISP User Name:
Enter the user name from your ISP .
ISP Password:
Enter the password from your ISP .
Import PPPoE user name and password
from the original router.
Note
PPPoE is used for illustration here. If you migrated your PPPoE user name and
password from your original router, this router auto-fills the ISP User Name and
ISP Password.
Tenda Router
Start
Next
Skip
02