Blocking sites temporarily with service settings
Blocking sites temporarily with service settings
Use service properties to automatically and temporarily block sites when incoming
traffic attempts to use a denied service. You can use this feature to individually log,
block, and monitor sites that attempt access to restricted ports on your network.
Configuring a service to temporarily block sites
Configure the service to automatically block sites that attempt to connect using a
denied service. From Policy Manager:
1
Double-click the service icon in the Services Arena.
The Properties dialog box appears.
2
Use the Incoming Service Connections Are drop list to select Enabled and
Denied.
3
Enable the Auto-Block Sites that Attempt to Connect Via checkbox.
To change the auto-block duration, see "Changing the auto-block duration" on page 44.
Viewing the Blocked Sites list
Use Firebox Monitors to view sites that are automatically blocked according to a
service's property configuration. From the Control Center:
1
On the QuickGuide, click the Firebox Monitors icon.
2
Click the Blocked Site List tab. (You might need to use the arrows to access this
tab.)
The Blocked Sites list appears.
46