Table of Contents
Advertisement
Microsoft Windows NT or 2000
1
Click
Start
At the C:\ prompt, enter ipconfig/all. Press
2
3
Enter your current TCP/IP settings in the chart provided
below.
4
Click
Cancel
Microsoft Windows 95 or 98 or ME
1
Click
=>
Start
2
At the C:\ prompt, enter
3
Select the "Etherenet Adapter."
Enter your current TCP/IP settings in the chart provided below.
4
Click
Cancel.
Macintosh
1
Click
Apple menu
2
Enter your current TCP/IP settings in the chart provided
below.
3
Close the window.
Other operating systems (Unix, Linux)
1
Consult your operating system guide to locate the TCP/IP
screen.
2
Enter settings in the chart provided below.
3
Exit the TCP/IP configuration screen.
User Guide 2.3
=>
=>
Programs
Command Prompt.
.
Run.
=>
Control Panels
Performing manual installation
. Click
winipcfg
=>
TCP/IP
.
Enter
.
OK
.
3
Advertisement
Table of Contents
