Breville Mistic 2 in 1 Connect LTF408 Instruction Book page 14

NIGHT MODE
NIGHT mode ensures the tower fan remains
quiet, dimming the lights on the control panel
and LED display screen, allowing for a more
comfortable night's rest.
To choose a fan speed setting, touch the
and buttons on either the control panel or
the remote until the desired number flashes
3 times on the LED display screen, then sets.
Depending on the set fan speed, the fan
speed will reduce by 1 every hour until the
lowest speed is reached (speed 1).
ECO MODE
ECO mode will save energy and operate
quietly on fan speed 1 and is ideal to be
used during sleep or when left on for a long
period of time.
n
NOTE:
Fan speed in ECO mode cannot be
manually adjusted.
AUTO-OFF AND AUTO-ON TIMER
The tower fan comes with a 12-hour auto-
off timer to turn the tower fan off after a
set number of hours. It also comes with a
12-hour auto-on timer that will turn on after
a set number of hours. Both can be set in 30
minute (0.5) increments up until 10 hours.
After 10 hours, both can be set in 1 hour
(1) increments and will switch the tower
fan into standby mode after the selected
number of hours have elapsed. The auto-off
timer and auto-on timer can be set on any
MODE, including humidification mode.
Either timer may be set by using the remote
control only.
AUTO-OFF TIMER Example: Set the
auto-off timer to 6 hours, and the tower fan
will stop operating after 6 hours.
AUTO-ON TIMER Example: Set the
auto-on timer to 6 hours, and the tower fan
will start operating after 6 hours.
To confirm the setting, press the timer
button again.
14
LTF408_ANZ_IB_D20.indd 14 LTF408_ANZ_IB_D20.indd 14
AUTO-OFF TIMER
Touch the button on the remote and
will flash along with "0.5" on the LED
display screen. Touch the
on either the control panel or the remote
control, until the desired number of hours
flashes on the LED display screen. Press
the button on the remote control to
start the timer. The time will display on
the LED display screen, and the
will illuminate. The timer will start on the
selected mode, and the mode will stop
automatically once the timer has expired.
n
NOTE:
If TIMER is touched on the remote but
no action is taken, the tower fan will exit
TIMER. Touch the button on the remote
to return to TIMER.
The LED display screen will not indicate
the remaining auto-off time, instead the
LED display screen will return to the set fan
setting. Press the button on the remote,
and the remaining time will display on the
LED display screen.
To cancel the pre-set auto-off time anytime
once the timer is set, press and hold the
button on the remote for 2 seconds and the
symbol will no longer illuminate.
n
NOTE
• The timer can be set on all modes and all
modes can be adjusted at any time once the
timer is set.
• The tower fan will switch to standby mode
once the set time has elapsed.
• To check the pre-set time left on the LED
display screen, press the
remote once.
and buttons
symbol
button on the
15/7/20 2:14 pm 15/7/20 2:14 pm