Razor Dirt Rocket SX350 Owner's Manual page 6

HEADLINE ASSEMBLY AND SET-UP
Inflating the Tires
Tires are inflated when shipped, but they invariably lose some pressure between the point of manufacturing and your
purchase. Inflate the tires to the correct PSI before first time use.
Lower air pressure can result in a shorter ride time.
Periodically check front tire. Reinflate when needed.
1
Using a bicycle style pump
equipped for a Schrader-type valve,
inflate both tires to the PSI indicated
on the sidewall of the tire.
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual. Service contact information is listed at the back of this manual.
5 5
WARNING:
Do not use the electric product for
the first time until you have inflated
the tires to the correct PSI. Failure
to do so may damage your motor
bike and void your warranty.
WARNING:
Do not overinflate, as this could
damage the tire or wheel.
Note: The pressurized air supplies
found at gasoline stations are
designed to inflate high-volume
automobile tires. If you decide to
use such an air supply to inflate
your tires, first make sure the
pressure gauge is working, then
use very short bursts to inflate to
the correct PSI. If you inadvertently
overinflate the tire, release the
excess pressure immediately.