Switching On / Off; Setting The Cutting Depth - Parkside PGG 15 D3 Translation Of The Original Instructions

Switching on / off

Plug into a socket.
Switching on:
Keep pressing the ON/ OFF switch
Switching off:
Release the ON/OFF switch

Setting the cutting depth

The cutting depth of the engraver is set using the stroke rate rotary
controller . A low setting is usually sufficient for most common
2
applications.
Turn the stroke rate rotary controller
increase the cutting depth.
metal
Material
Turn the stroke rate rotary controller
decrease the cutting depth.
1 2
glas wood plastic
.
1
.
1
towards the + sign to
2
3 4
ceramic leather
towards the - depth to
2
5 6
GB/IE 35