Service; Warranty Claim Procedure - Parkside PGG 15 D3 Translation Of The Original Instructions

Service

Have your product repaired at the service centre or an electri-
cian, using only original manufacturer parts. This will maintain
the safety of this product.
Always have a plug or power cord replaced by the product
manufacturer or its service centre. This will maintain the safety
of this product.
Have your tool repaired by a qualified person
This electric tool complies with the relevant safety rules. Re-
pairs should only be carried out by qualified persons using
original spare parts, otherwise this may result in considerable
danger to the user.

Warranty claim procedure

To ensure quick processing of your case, please observe the
following instructions:
Please have the till receipt and the item number (e.g. IAN 123456)
available as proof of purchase.
You will find the item number on the type plate, an engraving on
the front page of the instructions (bottom left), or as a sticker on the
rear or bottom of the appliance.
If functional or other defects occur, please contact the service
department listed either by telephone or by e-mail.
GB/IE 39