Install The Seat - Kohler C3-520 Installation Manual

5. Install the Seat

Mounting
plate
Slightly lift cover front tip, observe rear bugle slot, guide mounting plate into
the groove (per arrow 1 direction) Align the slot on the mounting plate with the
groove located below the toilet seat.
Slide the seat onto the mounting plate, front tip downwards (per arrow 2
direction) until you feel it snaps into place.
For Toilets without Threaded Inserts:
To adjust cover position, do not remove cover; only loosen screws to adjust
cover and mounting plate position. Tight down the bolts when desired position
is acquired.
For Toilets with Threaded Inserts:
To adjust cover position, remove cover first, readjust mounting plate position.
Once the mounting plate is confirmed, tighten screws, fasten mounting plate,
re-install cover.
1350324-KR01-A
Arrow 1
Arrow 2
6
Arrow 1
Kohler Co.