Display Cabling Diagram - Wacom Cintiq DTZ-1200W Installation Manual

DISPLAY CABLING DIAGRAM

C
AUTION
Make sure your video card has a DVI or VGA connector, and that you correctly set the
Cintiq DVI/VGA switch for the video connection you are using.
Do not attach the USB data cable until instructed to do so.
Cintiq pen
display tablet
– C –
– A –
DVI VGA
C
AUTION
Use only the converter unit and power adapter that came with Cintiq; use of an improper
converter or power adapter may damage the unit.
Do not connect or disconnect the video or power cables while Cintiq or your computer are
turned on – this can damage the display or computer video card.
Make sure that the display refresh rate does not exceed 75 Hz (60 Hz for WXGA).
– B –
DVI-I connector
Power adapter
– D –
DVI or VGA
video card
Rear panel
of computer
– E –
To AC outlet
Installation
Page 13