Headset Operation; Belt Clip - VTech T2447 User Manual

With caller id digital answering system cordless phone system

Hide thumbs Also See for T2447:

Table of Contents

Headset Operation

Your

Handset is equipped with a 2.5mm Headset Jack for use with an optional

t 2447

accessory Headset for handsfree operation. If you choose to use the Headset option,

you must obtain an optional accessory Headset, which is compatible with the

To purchase a Headset, call VTech Customer Service at 1-800-595-9511.

Once you have a compatible 2.5mm Headset, locate the Headset Jack on the

Handset. Connect the plug on the Headset cord to the jack (under a small rubber flap)

on the cordless Handset. The plug should fit securely. Do not force the connection.

To Attach

NOTE:

Whenever a compatible Headset is

connected to the cordless Handset, the

microphone on the Handset will be muted.

This is done to limit the effect of background

noise.

The

is also equipped with a

t 2447

detachable belt clip. Align the pins on the

inside edge of the clip with the notches

on the sides of the Handset. The belt clip

should snap securely into place. Do not

force the connection.

To Remove

t 2447

Table of Contents