Advanced Operation; Headset Operation; Belt Clip - VTech i 6763 Instructions Manual

Hide thumbs Also See for i 6763:

Table of Contents

Your i 6763 handset is equipped with a 2.5mm headset jack for use with an

optional accessory headset for handsfree operation. If you choose to use the

headset option, you must obtain an optional accessory headset that is

compatible with the i 6763.

To purchase a headset, visit us on the web at www.vtechphones.com or

call VTech Customer Service at 1-800-595-9511.

Once you have a compatible 2.5mm headset, locate the headset jack on the

i 6763 handset. Connect the plug on the headset cord to the jack (under a

small rubber flap) on the handset. The plug should fit securely. Do not force

the connection.

NOTE:

Whenever a compatible headset is

connected to the cordless handset, the

microphone on the handset will be muted.

This is done to limit the effect of background

noise.

Your i 6763 is also equipped with a

detachable belt clip. Align the pins on the

inside edge of the clip with the notches on

the sides of the handset. The belt clip

should snap securely into place. Do not

force the connection.

Table of Contents