Installing The Modem On A Linux Pc - Zoom 3095F Quick Start Manual

Installing the Modem on a Linux PC

1
Plug the modem into any USB port on your computer.
2
Connect one end of the supplied telephone cable to the
phone jack on the modem, and the other end of the cable to
a wall telephone jack.
3
Insert the modem CD into your CD-ROM drive, double-click
the CD icon, and open the Linux folder.
You will see three folders containing Linux drivers: rpm,
debian, and tar.
4
Select the appropriate folder for your version of Linux, and
copy the folder to your computer.
5
From the command prompt, access the folder containing the
driver.
•
To install the driver in .rpm or .deb format:
a
Type su (for .rpm) or sudo (for debian) and press
Enter.
b
At the prompt, enter your super user password.
c
Next, for .rpm, enter
rpm -i dgcmodem.i386.rpm
For .deb, enter
dpkg -i dgcmodem_i386.deb
d
At the prompt, enter the Linux source build directory
that matches your running kernel.
e
If necessary, run dgcconfig to complete the
installation.
•
To install the driver in .tar format:
a
Extract the driver with
tar -xzf dgcmodem-1.01.tar.gz
b
Change to the driver directory with
cd dgcmodem-1.01
c
Enter
su make install
or
sudo make install
d
At the prompt, enter your super user password.
14