Table of Contents
Advertisement
Base Menu Soft Functions
Base Settings
To access Base Settings, with the Base in the idle (OFF) mode, press MENU, scroll down to
BASE SETTINGS, then press OK. You can now access the following setting options:
RINGER VOLUME
RINGER MELODY
KEYPAD TONE
TONE/PULSE
CONTRAST
LANGUAGE
Press CLEAR at any time to back out of the Base Settings mode.
Ringer Volume
To adjust the Base Unit ringer volume:
Press MENU. Scroll down to BASE
•
SETTINGS, then press OK. RINGER VOLUME
will be highlighted, press OK. You will see a
graph on the Base display indicating the
current volume setting.
Press the
•
volume. At the lowest setting (graph is
completely clear), the Base will not ring when
a call comes in.
Press the
•
At the loudest setting, the graph is completely
shaded in.Press OK to confirm your setting.
Ringer Melody
There are eight Base ringer melody choices. To
change the melody:
Press MENU. Scroll down to BASE
•
SETTINGS, press OK. Scroll down to RINGER
MELODY.
Press OK. Use either scroll key to sample the
•
melodies.
Press OK to confirm your selection.
•
softkey to lower the ringer
softkey to raise the volume.
32
Advertisement
Table of Contents
