Additional Information; Headset Operation; Belt Clip - VTech i 5803 User Manual

Vtech communications owner's manual cordless telephone i 5803, i 5807

Hide thumbs Also See for i 5803:

Table of Contents

Your i 5857 Handset is equipped with a 2.5mm Headset Jack for use with an optional

accessory Headset for handsfree operation. If you choose to use the Headset option,

you must obtain an optional accessory Headset that is compatible with the i 5857. For

best results, use a VTech 2.5mm headset.

To purchase a Headset, call VTech Customer Service at 1-800-595-9511.

Once you have a compatible 2.5mm Headset, locate the Headset Jack on the i 5857

Handset. Connect the plug on the Headset cord to the jack (under a small rubber flap)

on the cordless Handset. The plug should fit securely. Do not force the connection.

NOTE:

Whenever a compatible Headset is connected to

the cordless Handset, the microphone on the

Handset will be muted. This is done to limit the effect

of background noise.

# #

The i 5857 is also equipped with a detachable belt

clip. Align the pins on the inside edge of the clip

with the notches on the sides of the Handset. The

belt clip should snap securely into place. Do not

force the connection.

Table of Contents

I5857 I5807