Table of Contents
Advertisement
A
,_L WARNING:
To avoid serious personal injury, always remove the battery
pack from the tool when cleaning or performing
any maintenance.
WARNING:
Always wear safety goggles or safety glasses with side shields
when using compressed
air to clean the tool. If the operation is dusty, also wear a
dust mask.
GENERAL
MAINTENANCE
Avoid using solvents
when
cleaning
plastic parts. Most
plastics are susceptible
to
damage from various types of
commercial
solvents
and may be
damaged
by their use. Use clean
clothes
to remove dirt, dust, oil,
grease, etc.
,_
WARNING:
Do not at any
time let brake fluids, gasoline,
petroleum-based
products,
penetrating
oils, etc. come
in contact
with plastic parts.
Chemicals
can damage, weaken
or destroy
plastic which may
result in serious personal injury.
,_k WARNING:
When servicing,
use only identical craftsman
replacement
parts. Use of any
other parts may create a hazard
or cause product
damage. To
ensure safety and reliability,
all
repairs should
be performed
by a
qualified
service technician.
CHUCK
REMOVAL
(Figs.
16.17
and
18)
The chuck can be removed and
replaced
with a new one.
1.
Lock the trigger switch by
placing the direction-of-
rotation selector
in the
center position.
Fig. 16
Mallet
Fig. 17
Philips screwdriver
Fig. 18
Keyless Chuck
Chuck Jaws/_
2±
Advertisement
Table of Contents
