Telephone Base And Charger Installation - VTech CS6429-2 User Manual

Getting started

Telephone base and charger installation

Install the telephone base and charger(s) as shown below.
If you subscribe to digital subscriber line (DSL) high-speed Internet service
through your telephone line, you must install a DSL filter between the telephone
line cord and the telephone wall jack. Contact your DSL service provider for more
information about DSL filters.
The telephone base comes ready for tabletop use. If you want to mount your
telephone on a wall, refer to Tabletop to wall mount installation on page 5
for details.
Telephone base
power adapter
Electrical outlet
not controlled by
a wall switch
• Use only the power adapters supplied with this product. To order a
replacement, visit our website at www.vtechphones.com or call
1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial
1 (800) 267-7377.
• The power adapters are intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
Telephone
wall jack
Telephone base
If you have DSL high
speed Internet service,
a DSL filter (not
included) is required.
Electrical outlet
not controlled by
a wall switch
Telephone line cord
2
Charger adapter
Charger