Message Window Displays - VTech CS6429-2 User Manual

Answering system operation

Message window displays

The message window on the telephone base displays the total number of
messages. See the table below for other message window displays.
Window display
0
1-99
(flashing)
0-99
&
1-99 F
(alternating)
1-8
0-6
- -
When the memory is full, the answering system answers incoming calls after 10 When the memory is full, the answering system answers incoming calls after 10
rings and announces, "Memory is full. Enter your remote access code." rings and announces, "Memory is full. Enter your remote access code."
Description
No messages.
The total number of old messages recorded.
The current message number during old message playback.
When time and date are not set, it flashes the total number
of new messages recorded, or the total number of old
messages recorded.
The telephone base may have lost and regained power. The
clock needs to be set.
The answering system memory is full with total number of
messages recorded.
The telephone base speaker volume level while adjusting.
The telephone base ringer level while adjusting.
The answering system is being programmed by a
system handset.
The answering system is answering a call, or recording a
memo or announcement.
The answering system is being accessed remotely.
45